How To Fix The Router Table Most Common Problems

It is most important that woodworkers should keep their tools in excellent condition. High-quality wood routers are capable of performing many tasks, including shaping or cutting material and trimming. You can use this powerful tool in various projects and reap different benefits.

But, sometimes, a non-performing or non-functional router can cause some problems. There are a few possible reasons why your wood appliance is not functioning properly, such as a broken bit, problem with the power supply, or electrical problems. Most of them can be fixed without calling a technician.

In this article, we will discuss the most common problems and how to solve them. To resolve these issues, you must have some basic knowledge.

Router Table Most Common Problems and Their Solutions:

A router table can make woodworking projects easier. You can make precise cuts even if you’re a beginner, by using the table and accessories like the router edge guide. A simple operation can become extremely frustrating when something goes wrong.

Remember, everybody makes mistakes, so don’t worry about it. In this post we will discuss some of the most common router problems you can fix yourself rather than hiring a repairman. Please follow our instructions that will guide you during the work process.

Power Supply.

A power tool that refuses to start is one of the most frustrating things to experience when you want to begin your woodworking project. You need to check several things when your router table does not respond when you flick the power switch. First, make sure your router table is plugged in, May be You could have accidentally pulled the power cord while cleaning up your shop.

If your router table won’t turn on after it’s been plugged in, You should check the circuit breaker. If your fuse box isn’t the issue, it’s time to contact an electrician to replace either your electrical outlet or the power switch on your router table.

Slipping Bit.

If your router bit slips in the chuck while you are working, you will not be able to cut efficiently. When this occurs, you will not only notice that the bit stops, but also that the chuck continues to turn. Then stop the machine and tighten the chuck once more.

If the problem persists, check to see if the chuck key is not stripped and is preventing you from tightening it properly. Some older router tables may require a new chuck, since its locking mechanism may have worn away or its clamping mechanism may no longer work.

Bit Depth.

Your router bit will need to be set at a certain depth for some of your woodworking projects. Router tables typically come with gauges on the table for adjusting the bit depth. The dust from saws may build up over time, increasing the thickness of bits. Ensure that sawdust and wood chips are regularly blown away with compressed air. To clean out compacted sawdust, use a screwdriver to loosen it, then use compressed air to remove it.

Stalling or Inconsistent Bit Speed.

Loose or worn belts are usually responsible for stalling or inconsistency in bit speed. To inspect the drive belts, open the table’s housing after cutting the power supply. If you have an older machine, see if the belts are unevenly worn or cracked.

If the belts are in good shape, make sure they are securely attached to the drive wheels. Check your owners’ manual for instructions on how to replace or tighten belts. If the problem persists, you will need to contact an authorized repairman.

Unmovable Guide.

You should not underestimate the importance of the guides on your router table. Using the guides will enable you to make straight cuts to the desired dimensions. Your router table guides will freeze if you have not been using your router table for some time or if the temperature fluctuates between hot and cold in your workshop.

If the bolts are too tight, use pliers to loosen them but be careful not to break them. It may be necessary to spray some lubricating fluid on the bolts to loosen them. If you must use lubricant, make sure that all the bolts are securely fastened when you use the router table the next time.

 

 

Leave a Comment